![]() You can now install any app that requires root permission. Samsung Galaxy Tab 3 10.1 P5200/P5210 running on Android 4.2.2 Jelly Bean is now rooted successfully. Step 11: Once the installation process completes, return to main recovery menu and select "reboot system now". Now, navigate to the root.zip file that you copied earlier and confirm the installation by selecting Yes. Step 10: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up and Power buttons together. Steps to Root Samsung Galaxy Tab 3 10.1 P5200/P5210 via CWM Recovery ![]() Step 8: Once the installation process completes, unplug the USB cable to disconnect your device from the computer and then proceed to Step 9. Step 7: Double-check and click Start button in Odin. ![]() Also, ensure the Auto Reboot and Re-Partition options are NOT selected. Step 6: In Odin, click the PDA button and select the 5 file. Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer. Additionally, the successful connected will be indicated by a message saying Added. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Step 5: Connect the Galaxy Tab 3 10.1 to the computer using USB cable while it is in the Download Mode. Step 4: Run Odin on the computer as an Administrator. Now press the Volume Up button to enter Download Mode. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. ![]() Step 3: Switch off the Galaxy Tab 3 10.1. Step 2: Copy the root.zip file to the SD card of your device. Step 1: Extract the CWM/TWRP and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool. Steps to Install CWM/TWRP Recovery on Samsung Galaxy Tab 3 10.1 P5200/P5210 Verify the model number of the Galaxy Tab 3 10.1 by selecting Settings > About Phone. Applying these on any incorrect variant might brick the device. The CWM and TWRP files works only on the Samsung Galaxy Tab 3 10.1 with model number GT-P5200 (3G) and GT-P5210 (Wi-Fi). Ensure the battery of the device is charged more than 80 percent.Ħ. ![]() The Galaxy Tab 3 10.1 should be factory unlocked and not locked to any particular carrier.ĥ. Make a backup of all your important data before following the guide.Ĥ. Enable USB Debugging Mode on the device by navigating to Settings > Developer Options.ģ. Install USB Drivers for Samsung Galaxy Tab 3 10.1 on your computer.Ģ. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |